|
The
Set Targets screen lets you create a system of target
times, audible indicators (beeps), and letter grades
for any or all programmed event(s)
From
STORE PARAMETERS Screen: |
| 1. |
Press  to
select [TARGETS]. |
| 2. |
Press  You
are now in the SET TARGETS screen. |
|
3. |
Press  to
move the cursor to the [=] field. |
4. |
Press  or  to
select the desired vehicle detection point (MENU, GREET,
WIN 1, WIN 2, LINE). |
| 5. |
Press to
move the cursor to DAY. |
| 6. |
Press to
move the cursor to [:] immediately to the right of DAY. |
7. |
Press or to
select the desired day. |
8. |
Press to
move the cursor to [:] immediately to the right of
DAYPART. |
| 9. |
Press or to
select the desired daypart. |
| 10. |
Press to
move the cursor to BEEP. |
11. |
Press to
move the cursor to [=] immediately to the right of
BEEP ON ARRIVAL. |
| 12. |
Press or to
toggle the BEEP ON ARRIVAL option to YES or NO. |
13. |
Press to
select the grade (A, B, C, etc.) for which you wish
to set or change the target time. (If you do not want
targeting for a particular grade, set the grade’s
target
time to 0.)
NOTE: The target
time for B must be equal to or greater than that
for A; the target time for C must be equal to or
greater than that for B, and the same applies through
the entire sequence of letter grades. The Timer adjusts
automatically to ensure this.
Pass/Fail grading may be
used rather than letter grading: Set all letter grades
except F to the same time – the maximum time allotted
to the event (MENU, GREET, etc.) to achieve a passing
grade. For example, if you want to make 10 seconds
the (Pass) time, set A, B, C, and D to a time of 10
(the selected event must occur within this amount of
time in order to “pass.”). |
| 14. |
Press to
move the cursor immediately to the left of the B (beep)
column field. |
15. |
Press or to
set the beep count for the grade you have chosen (0 -
9 beeps may be chosen). The Remote will beep (the number
of times you have specified) when the selected event
exceeds the target time you have selected. |
| 16. |
Press to
move the cursor immediately to the left of the P (print)
column field. |
17. |
Press or to
toggle the printing option for the grade to Y (yes) or
N (no). If you select Y (yes), the Timer will print every
car that falls within the particular grade’s target
time. |
| 18. |
Press to
move the cursor to the field that begins F REPEAT. |
| 19. |
Press to
move the cursor to the field just to the right of @. |
20. |
Press or to
set the number of times you want the beep to repeat.
The Remote Display will sound two successive short beeps
at intervals of 2, 5, 10, 15, or 30 seconds depending
on your choice. (Select OFF to disable the repeat beep.) |
| 21. |
Press to
move the cursor immediately to the left of DAYS. |
| 22. |
Press to
move the cursor to [A] (A means “All”), or
to any of the days to the right. |
23. |
Press or to
select the days to which you wish to copy the targets
you have set. Your selections are now highlighted. |
| 24. |
Press to
move the cursor to the DAYPARTS field. |
25. |
Press  to
move the cursor to [A] (A means “All”), or
to any of the dayparts to the right. |
26. |
Press or to
select the dayparts to which you wish to copy the targets
you have set. Your selections are now highlighted. |
27. |
Press to
perform the specified copy operation. Repeat this procedure
as needed for different targeted events. |
28. |
Press  to
move the cursor to the top of the screen to the [TARGET]
[DAY] and [DAYPART] fields. |
29. |
Press or toscroll
through the TARGET, DAY, and DAYPART values to
confirm your settings. |
