The
Set Dayparts screen lets you break each day into a
number of smaller units called day-parts, which are
used to group data for viewing and reporting.)
From
STORE PARAMETERS Screen:
1.
Press to
select [DAYPARTS].
2.
Press You
are now in the Set Dayparts screen.
NOTE: The
cursor is now on DAY. To change the day of the week,
complete the following two steps.
3.
Press to
move the cursor immediately to the right of DAY:.
4.
Press or to
change the day.
5.
Press to
move to the desired daypart.
6.
Press to
move to the [=] or [-] fields to change the START or
STOP times.
7.
Press to
change the time in 15-minute increments. The Timer
adjusts automatically to prevent time gaps or overlaps.
NOTE: The
ending time of each daypart coincides with the starting
time of the next daypart for the same day, though
you may use different dayparts for each day of the
week. Daypart 1 always starts at the opening time
for the day, and the last programmed daypart always
ends at the closing time for the day.
8.
Press to
add a new daypart by moving the cursor immediately
to the
right of the first unused daypart number (for which START
and STOP times have not
yet been entered).
9.
Press or to
add the daypart. The START and STOP times are now entered.
10.
Press to
add the daypart. The START and STOP times are now entered.
11.
Press to
delete the daypart. Any dayparts that follow will automatically
be removed as well. And the store’s closing time
will automatically be entered in place of the STOP
time for the last remaining daypart.
NOTE: If all days
use the same dayparts, you can set the dayparts for
only one day and then use the COPY TO feature to
copy the same settings to all other days, as explained
in the following steps.
12.
Press to
move the cursor immediately to the right of DAY:.
13.
Press or to
select the desired day from which to copy.
14.
Press to
move cursor to COPY.
15.
Press to
move the cursor to <ENTER>.
16.
Press to
copy the displayed daypart settings to all other days,
replacing any individual dayparts previously set for
these days.
to
select [DAYPARTS].
You
are now in the Set Dayparts screen.
to
move the cursor immediately to the right of DAY:.
or 
to
change the day.
to
add the daypart. The START and STOP times are now entered.
to
delete the daypart. Any dayparts that follow will automatically
be removed as well. And the store’s closing time
will automatically be entered in place of the STOP
time for the last remaining daypart. 