Important: If
you proceed with the following programming, all car
count data will be lost.
Note: If
no keys are pressed in a short period of time,
the timer times out and automatically returns to
the Activity screen. If this occurs, any unsaved
data will be lost.
Current
targets can be viewed by pressingfrom Activity screen.
1.
Press
to open Menu screen.
2.
Press
to move cursor
to SET PARAMETERS.
3.
Press
You are then
prompted to enter your 4-Digit Access Code.
4.
Enter
your 4-digit Access Code. Cursor is now in Set
Parameters screen.
5.
Press
to move cursor
down to TARGETS.
6.
Press
You are now
in Target screen and cursor is on TARGET
STA.
Note: Depending
on the Fast Track 2+2 model purchased, different choices
are available in setting Targets. Full-line models
allow the choice of setting targets for one of the
following: GREET, MENU, WIN1 (cashier), WIN2 (service
or cashier / service), and LINE. The basis model allows
you to set grades only. Typical Targets are WIN2 or
LINE.
7.
Press
You
are then prompted to enter the Access Code.
Important: If
you proceed with the following programming, all car
count data will be lost.
8.
Enter
your 4-digit Access Code. A MEMORY RESET / PARAMETER
RESET message is printed, and the cursor moves to TARGET
STA.
9.
Press
until the wanted Target
Station is set.
10.
Press
to move cursor
to A <=.
11.
Press
The cursor moves
to the right of A <=.
12.
Press
or until
the Target Time wanted is set.
13.
Press
to move cursor
to B. Note: Target Time for B must be greater
than for A.
14.
Press
or until
the Target Time wanted is set.
15.
Press
to move cursor
to C. Note: Target Time for C must be greater
than for B.
16.
Press
to move cursor
to D. Note: Target Time for D must be greater
than for C. Target time for F is not programmable
and is automatically greater than for D.
17.
Press
Cursor
moves to DAY: directly under COPY INFO TO:.
If you wish to copy information to another day, proceed
to Step 18.
18.
Press
to select ALL.
19.
Press
to move to CUM1.
20.
Press
until CUM displays ALL.
21.
Press
to move cursor
to DAY and to save the data entered.
from Activity screen. 
until
the Target Time wanted is set. 