Fast Track 2+2 Timers

Notes:

Store hours must be set before CUM (cumulative) Periods can be set. Existing Cum Periods can be viewed by pressing from the Activity screen. CUM Periods are also referred to as Dayparts.

Start time on CUM1 must be the same as the store opening time. The end time on the last CUM must be the same as the store closing time. CUMs cannot overlap and must be in order (from earliest time to latest time) with no gaps between CUMs.

If no keys are pressed in a short period of time, the timer times out and automatically returns to the Activity screen. If this occurs any unsaved data will be lost.

Important: If you proceed with the following programming, all car count data will be lost.

Press

Press to open Menu screen.

Press

to move cursor to SET PARAMETERS.

Press

You are then prompted to enter your 4-Digit Access Code.

Enter your 4-digit Access Code. Cursor is now in Set Parameters screen.

Press

to move cursor down to CUM PERIODS.

Press

You are now in the CUM Period screen, and the cursor is on DAY.

Press

until the day displayed is Monday (MON).

Press

to move cursor to CUM1.

Press

You are then prompted to enter the Access Code.

Important: If you proceed with the following programming, all car count data will be lost.

10.

Enter your 4-digit Access Code. The printer prints a MEMORY RESET / PARAMETER RESET message, and the cursor moves to the right side of CUM1. Note: Access Code only needs to be entered once.

11.	Press	or	to change START time up or down. The time changes in 15-minute increments.
12.	Press	to move cursor to END time (cursor is on [-] before END time).
13.	Press	or	to change END time up or down. The time changes in 15-minute increments.
14.	Press	then	to set CUM2.
15.	Press	or	Press or to change START time up or down. The time changes in 15-minute increments.
16.	Press	to move cursor to END time (cursor is on [-] before END time).
17.	Press	or	to change END time up or down. The time changes in 15-minute increments.
18.	Press	then	to set CUM3.
19.	Press	or	Press or to change START time up or down. The time changes in 15-minute increments.
20.	Press	Press to move cursor to END time (cursor is on [-] before END time).
21.	Press	or	to change END time up or down. The time changes in 15-minute increments.
22.	Press	then	to set CUM4.
23.	Repeat steps 19 through 21 to set CUM5 through CUM8, if desired. Note: It is not necessary to set all CUMs.
	Press	to clear a CUM Period.
24.	Press	to save changes. The cursor moves to COPY TO.
25.	Press	until the cursor is at DAY at top of screen.
26.	Press	to go to the next day.
27.	Repeat steps 11 through 26 for each day.
28.	Press	twice to return to Activity screen.