Store Hours must be set before Shift Periods can be set. Existing Shift Periods can be viewed by pressing from the Activity screen.

Start time on Shift 1 (SHF1) cannot be before the store opening time. The end time on the last Shift (SHF_) cannot be after the store closing time. Shifts must be in order (Shift 1, then Shift 2, then Shift 3). Up to three shifts per day can be set, and shifts can be different for each day of the week. Shifts cannot overlap, nor can there be gaps between shifts. All three shifts do not have to be used (you can set up 1 shift, 2 shifts, 3 shifts or no shifts).

NOTE: If no keys are pressed in a short period of time, the timer times out and automatically returns to the Activity screen. If this occurs any unsaved data will be lost.

IMPORTANT: IF YOU PROCEED WITH THE FOLLOWING PROGRAMMING, ALL CAR COUNT DATA WILL BE LOST.

1. Press to open Menu screen.

2. Press to move cursor to [SET PARAMETERS].

3. Press You are then prompted to enter your 4-digit Access Code.

4. Enter your 4-digit Access Code. You are now in the Set Parameters screen.

5. Press to move cursor to [SHIFTS].

6. Press The Set Shifts screen appears and the cursor is on [DAY] .

NOTE: The Set Shifts [DAY] always defaults to start on Sunday (SUN).

7. Press until the day you want to change is selected (advances one day each time the key is pressed).

8. Press until the cursor moves to [SHF1].

9. Press You are then prompted to enter the Access Code.

IMPORTANT: IF YOU PROCEED WITH THE FOLLOWING PROGRAMMING, ALL CAR COUNT DATA WILL BE LOST.

10. Enter your 4-digit Access Code. A MEMORY RESET/PARAMETER RESET message is printed, and the cursor moves to the right side of SHF1.

11. Press or to change START time up or down. The time changes in 15-minute increments.

12. Press to move cursor to END time; cursor is on [-] before END time.

13. Press or to change END time up or down. The time changes in 15- minute increments.

14. Press then to set [SHF2].

15. Press or to change START time up or down. The time changes in 15-minute increments.

16. Press to move cursor to END time; cursor is on [-] before END time.

17. Press or to change END time up or down. The time changes in 15- minute increments.

18. Press then to set [SHF3].
 

19. Press or to change START time up or down. The time changes in 15-minute increments.

20. Press to move cursor to END time; cursor is on [-] before END time.

21. Press or to change END time up or down. The time changes in 15- minute increments.

NOTE: It is not necessary to set all Shift Periods.

NOTE: If you wish to clear a Shift Period, make certain that your cursor is at the START time for that period, and press

22. Press The cursor moves to [COPY TO]. If you wish to copy the above Shift Periods to another day, proceed with step 23. If you do not want to copy the selected Shift Periods,go to step 26.

23. Press until day wanted (or ALL) is displayed.

24. Press or to move cursor to [DAY] and to save the data entered.

25. Press until the day you want to change is selected (advances one day each time the key is pressed), and repeat steps 7 through 21 for the next day selected. When finished, proceed to step 26.

26. Press twice to return to Activity screen.